CRL 76NGA36 36" Commercial Heavy-Duty Automatic Door Bottom Aluminum

• For Mortise Applications
• Length Can Be Cut Down in Length Up to 2″ (51 mm)

Finish

Aluminum

Width

7/8

Finish/Color

Aluminum

Automatic Door Bottom

Yes

Full Height (Inches)

1-3/8

Full Height

1-3/8

Product Overview
This CRL Commercial Heavy-Duty Automatic Door Bottom is designed to be mortised into the bottom of the door and is mechanically actuated. An internal carrier bar with a vinyl insert drops from a concealed cavity to form a tight seal between the base of the door and the threshold. This is an ideal bottom weather seal for use where carpeted interiors require the door bottom to retract upward when the door is opened. Supplied with a frame “actuator” protector plate, the door bottom is field reversible for either “hand” of door.
Actuation of the inner drop down bar only functions properly when this door bottom is installed on the door. Testing by hand before installation will only drop the back of the bar. Proper function only occurs when the back edge (near the hinge side) drops down onto the sill. Once the back of the bar makes contact, the front edge will drop, creating the seal. At this time, adjustments can be made to the threaded hex plunger by backing out the plunger to increase the seal pressure against the sill.

Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.