STIHL Cutquik TS 700 Cut-Off Saw, Tool/Kit: Tool, 14 in Dia Blade, 98.5 cc Engine Displacement, 9300 rpm Speed

STIHL Cut-Off Saw, Tool, 14 in Blade Diameter, 0.787 in Arbor, 98.5 cc Engine Displacement, 40.6 oz Fuel Capacity, 9300 rpm, Ergonomic Handle, Additional Information: 4.9 in D Maximum Cutting, 14 in Maximum Wheel, 5350 rpm Maximum Spindle Speed, 6.7 bhp Engine Power

Features:

• The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope
• The STIHL caring for nature seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions
• STIHL defines low exhaust emissions as being cleaner than EPA and/or CARB exhaust emission standards
• The IntelliCarb compensating carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM
• IntelliCarb uses air from the clean side of the air filter to control the diaphragm and flow of fuel
• As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb system adjusts the fuel flow to compensate for the decrease in air flow
• This is in contrast to typical carburetors that utilize this air from the dirty side of the air box
• The X2 air filtration system revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions
• Outside air enters the system in a swirling motion, removing 80% of dust particles
• This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine
• The X2 air filtration system is virtually maintenance-free and maintains an incredible 99.96% cleaning efficiency
• The ELASTOSTART starter handle is a feature of STIHL
• It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord
• The ELASTOSTART starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking
• The forces which occur at the grip after the first compression stroke are smoothed out
• Bayonet-style filler cap includes retainer for easy use, even with gloves on
• STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment
• The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience
• With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings
• The ergonomic top-handle bar design provides an optimal comfortable grip in any working position

Other Attributes:

• SKU: 42240112801US
• Tool/Kit: Tool
• Blade Diameter: 14
• Arbor Size: 0.787
• Engine Displacement: 98.5
• Fuel Capacity: 40.6
• Speed Rating: 9300
• Handle Type: Ergonomic
• Additional Information: 4.9 in D Maximum Cutting, 14 in Maximum Wheel, 5350 rpm Maximum Spindle Speed, 6.7 bhp Engine Power

Documents:

Warranty Information
Instruction/Installation Manual

Warning:

California Proposition 65 Warning.